FatDyn-X
Laws and geometries Workflow Verification

Capability

From the fatigue hotspot to a crack-growth life

Fatigue analysis says where a crack will start. Crack growth says how long the part lasts after that, and how often to inspect it. FatDyn-X carries the same loads and stresses from one question to the next.

Growth laws

  • Paris, Walker, Forman, NASGRO
  • Tabular da/dN against ΔK with R-curves
  • Threshold, short-crack bridge and non-propagation screen

Crack geometries

  • Through, single and double edge, hole, embedded
  • Newman-Raju surface crack: depth and length grow independently
  • User table β(a)

Additive-manufacturing defects

  • Murakami √area equivalent crack
  • Gumbel extreme-value design defect fitted to a CT pore list

Workflow

One card in the master deck

  1. Ask for it

    Request crack-growth export on a critical-plane fatigue load case, or name the locations yourself: welds, build planes and postulated crack paths.

  2. FatDyn-X exports, the crack-growth program runs

    Tensor histories of the most damaged elements, a site list with normals, thickness and material, and a starter input file. The crack-growth run starts automatically.

  3. Results

    Life in cycles and hours, stop reason, final crack size and an inspection interval per site; a-N curves; contours of crack-growth life.

Crack-growth material cards sit in the same open material database as the S-N and ε-N data, each with its source.

Verification

Checked against closed-form solutions

38 unit checksagainst closed-form solutions: Paris, Walker, NASGRO, Newman-Raju, Bowie, Feddersen

17,589 vs 17,587 cyclesend-to-end run through the FatDyn-X export against the reference, within 0.01 %